Motherboard Notes

Power Indicator Light

• When powered via Type-C without connecting other motherboard power sources, the SYS_5V and SYS_3.3V indicators should light up.
• After connecting motherboard power sources such as HVIN, VIN, BOARO, and POWER, the motherboard power indicator should remain constantly lit.

Drivers

• TP5160 and TP2209 are only named differently, and no jumper settings are required to select the driver mode.
• The driver port can only install TP drivers and cannot accommodate other devices.

Limit Port

• ProX10 supports 5V and 12V power selection. Please note that if using proximity switches, a diode must be installed for voltage reduction.

Host Computer

• ProX10 supports the use of an external host computer. After setting the DIP switch to connect via Type-C, it can be used.

Firmware Flashing

• The motherboard supports firmware flashing using a TF card, but it comes with Katapult by default.
• If you need to use a TF card for flashing, the Bootloader (BL) must be re-flashed.