Klipper Config Generator

Notes

• Test feature

Usage Instructions

• Follow the page steps to select the printer model, mainboard, drivers, extruder, endstops, probe, temperature control and peripherals, then finally generate and download printer.cfg. The configuration is generated only with local data in the browser and will not be uploaded.
• The extruder model dropdown provides reference parameters for common models. After installation, rotation_distance and pressure_advance must be recalibrated.

Notes

• The generated result is a configuration template and must be reviewed item by item according to the actual mechanical structure, wiring harness, driver model, sense resistor and thermistor type.
• The serial / canbus_uuid of the mainboard and toolboard are placeholders commented out by default. Before importing into the printer, you must uncomment the corresponding lines according to the actual device and fill in the correct connection address or UUID.
• The structural validation on the page is used to detect missing items, duplicate pins, pin format and parameter range issues, and cannot replace the checks performed when Klipper actually loads the configuration.
• If any settings are modified after generation, the page will mark the old result as expired and disable copy/download; please regenerate before exporting.
• Toolboard slots use fixed numbers to store pin references, so deleting or replacing one toolboard will not misalign the pins of other toolboards.
• ADXL345 supports selecting the lis2dw / adxl345 pins on the toolboard and automatically filling in the SPI configuration; when using the mainboard SPI, please verify spi_bus and cs_pin according to the actual wiring.
• The feature is continuously being improved.

Loading...