📄️ Firmware Flashing and Onboard DIP Switch Instructions
How to Determine Which Firmware You Need
📄️ USB Firmware Flashing
Check the DIP Switch
📄️ USB Bridge CAN Firmware Flashing
SSH Connection to the Host
📄️ Read and View Mainboard ID
* This tutorial is for reading and viewing the ID of the mainboard. For toolboards, please refer to the corresponding product's ID search tutorial.
📄️ Connect Toolboard and Search for ID
This tutorial specifically covers the wiring and ID search for the Toolboard. The related steps are not applicable* to the Mainboard. Please distinguish between them carefully.
📄️ BL Firmware, Do Not Use!
* Please note that the bootloader is pre-flashed at the factory and does not need to be re-flashed.