Skip to main content

Screen Wiring and Configuration

Screen Wiring​

Important Safety Notice
  • When connecting TFT or HDMI screens using FPC cables, always operate with the device completely powered off to prevent screen damage.
  • When wiring TFT screens, carefully confirm the insertion direction of the FPC cable to avoid device malfunction due to reverse connection.

TFT Resistive Screen Wiring​

Tip
  • The TFT screen package includes two FPC cables: 14P (narrow cable) and 16P (wide cable).
  • For lite2, be sure to use the 14P (narrow cable).
  • TFT-V2 Resistive Screen Wiring
Loading...
  • TFT-V1 Resistive Screen Wiring
Loading...

Screen Configuration​

FLYOS-FAST System Screen Configuration​

  1. Access the device IP address via a browser, e.g.: http://192.168.6.110/

fluidd interface operation: Uncheck "Filter hidden files and folders"

Loading...

mainsail interface operation: Check "Show hidden files"

Loading...
  1. Enter the displayed .flyos-config folder and find the sys-config.conf configuration file
Loading...
  1. Edit the sys-config.conf file and modify the corresponding configuration items according to the screen type
  • Change the content after screen= to fly-tft-v1
  • Change klipper_screen=0 to klipper_screen=1
  • Below is a reference after modification
board=fly-lite2
screen=fly-tft-v1
  • Also modify
klipper_screen=1
Loading...
Configuration Notes
  • Ensure the DIP switch on the back of the screen is set correctly: Switch the resistive screen to Resi.
  • The configuration file format must be key=value, with no spaces after the equals sign.
  • Do not modify the configuration file format arbitrarily; otherwise, the configuration will not take effect.
  1. After saving the configuration, restart the system for the changes to take effect.
Loading...