📄️ Introduction
The FLY SB2040 PRO is a tool board developed by Guangzhou Magnesium Electronics Technology Co., Ltd. for the VORON Stealthburner print head. Using this tool board, four wires can replace the complex wiring between the original motherboard and the print head, optimizing the layout. The SB2040 is suitable for stealthburner and afterburner. It integrates a CAN transceiver, USB port, TMC2240 driver, ADXL345 accelerometer sensor, three controllable fans, and other functions. This tool board is compatible with Klipper and RRF firmware.
🗃️ SB2040 PRO firmware compilation and programming
3 items
📄️ Toolboard ID Reading
* Connect the toolboard to the UTOC or a motherboard flashed with bridging firmware using an XT30 data cable before searching for the ID. Below is a reference wiring diagram.
📄️ Motherboard Wiring
Pin Description
📄️ Reference Configuration
📄️ Accelerometer usage
Usage tutorial
📄️ Drive Undervoltage Solution
Method One
📄️ 3D Model and Schematic
* This document provides the following