Firmware flashing instructions
- ERCF V2 comes pre-flashed from the factory with Katapult firmware for CAN connections at a rate of 1M
Firmware Compilation and Burning
Please first choose the firmware type you intend to burn. The corresponding compilation and burning steps will only be displayed after a selection is made.
Bootloader Recovery (Unbricking)
The FLY-ERCF V2 is pre-flashed with Katapult at the factory. Do not re-flash the firmware on this page during normal use or when updating Klipper firmware; this page is only for unbricking recovery after the Bootloader is damaged.